Ximple W2

What is inside this Starter Pack?

The set is complete with

  • 1 x Main Control Unit
  • 2x Door Sensor
  • 1x Remove Keychain
  • 1x Indoor Sire
  • 1x Motion Sensor

If internet down, can the system still function?

Yes, system still fully function but unable to send push notifications to phone.

The camera is build in with motion sensor?

Yes, it has. Our wireless outdoor camera will only start recording for 60 seconds when motion is detected. It will stop recording when there’s no movement after 60 seconds. But user can view the live camera from their smartphone.

L9 & V9

Why is the SER light always on?

To check the reason, press 7 and hold for 2 seconds

If Keypad shows,
Zone 1 = AC Loss
Zone 2 = Real time clock loss
Zone 3 = Siren fail
Zone 4 = Battery low voltage
Zone 5 = Telephone line/GSM CMS reporting fail
Zone 6 = Telephone line/GSM personal reporting fail
Zone 7 = Telephone line connection fail

Why is the MEM light always on?

Press 8 and hold for 2 seconds to view the last record when an alarm was triggered.

How to bypass zone?

Press 6 for 2 seconds, press Bypass [Zone Number] + #

Why there's no buzzer sound of timer countdown after alarm system is armed?

Press MODE + 6 + # to activate buzzer countdown.

How to change 4 digit master code?

Press MODE + 4 Digit Master Code + #, 01 + New User Code + Re-enter New User Code + #

How to set program personal telephone call info when alarm system triggered?

Press MODE + 4 Digit Master Code + # , 17 + Personal Telephone Number 1 + #

Press MODE + 4 Digit Master Code + # , 18 + Personal Telephone Number 2 + #

V16

Why is the Service icon always on?

Press 7 and hold for 2 seconds, if keypad show

Zone 1 = AC Loss
Zone 2 = Real time Clock loss
Zone 3 = Siren Fail
Zone 4 = Battery Low Voltage
Zone 5 = Telephone Line/GSM CMS Reporting Fail
Zone 6 = Telephone Line/GSM Personal Reporting Fail
Zone 7 = Telephone Line Connection Fail

Why is the Book icon always on?

Press 8 and hold for 2 seconds

View the last record when an alarm was triggered

OR

Press MODE + MODE + # , Can view Last 40 Event Log

How to bypass zone?

Press 6 for 2 seconds
Press Bypass Zone Number + #

How to turn on Door Chime?

Press 9 and hold for 2 seconds
Press Chime Zone Number + #

Why there's no buzzer sound of timer countdown after alarm system is armed?

Press MODE + 6 + # to activate buzzer countdown.

How to set program personal telephone call info when alarm system triggered?

Press MODE + 4 Digit Master Code + # , 17 + Personal Telephone Number 1 + #

Press MODE + 4 Digit Master Code + # , 18 + Personal Telephone Number 2 + #